T+A 1260 R SACD i gruppen Elektronik / CD spelare / T+A hos AudioConcept (257-2)

T+A 1260 R SACD

T+A 1260 R SACD

38500 SEK
Info Mer information Ge ditt omdöme Tipsa en vän Blogga

This new player is also based on a legendary predecessor in the shape of the SACD 1250 R, which has garnered one of the best sets of reviews over the last few years. Naturally we have retained the earlier machine’s overall design, but have introduced new components and technologies such as OAD and 32-bit mode to gain further improvements in sound quality. The SACD 1260 R is a thoroughbred two-channel player which was developed with the sole purpose of delivering the finest possible stereo reproduction from CD and SACD. These two formats are entirely different, and therefore require wholly different processing; that is the only way of extracting the optimum results from both. T+A has adopted a unique philosophy for audio reproduction: each music format has its own independent signal process; there are even separate oscillators for CD and SACD.

The converter / analogue output section of the SACD 1260 R represents the peak of what is feasible with today’s technology: no fewer than eight of the latest Burr-Brown / TI D/A converters are employed, with four forming the unique T+A quadruple converter for each channel, now working in 32-bit mode in conjunction with the digital signal processor. The digital section is totally separated from the analogue section by the use of i-Couplers, while the output stage is well up to analogue High-End standards. Separate mains power sections and voltage supplies for analogue and digital sections are typical of our designs, as are encapsulated sub-assemblies, a High-End pushrod-based disc mechanism and an analogue method of switching the output bandwidth.



SACD-Stereo, CD-DA, CD-R / RW
Audio data

Analogue outputs Stereo 2,5 Veff / 22 Ohm
Digital outputs 1 x coax, 1 x optisch
IEC 60958 (CDDA / LPCM)
D/A converter 32 Bit, 384 kHz Sigma Delta,
8-times oversampling


free programmable signal processor with
4 selectable oversampling algorithmus.
FIR kurz, FIR lang, Bezier/IIR, Bezier
Analogue output filter

Phase linear bessel filter
with 100 kHz limit frequency
switchable 60 kHz / 100 kHz
Frequency responce / Dynamic range

CD 2 Hz - 20 kHz / 100 dB
2 Hz - 44 kHz / 110dB
Total harmonic distortion < 0,001 %
Signal noise ratio 116 dB
Channel seperation 110 dB

Against feedback effects, shielding measures to eliminate induced RF interference, a floating suspension disc mechanism in an anti-resonance housing, a sophisticated, fully encapsulated quadruple converter and total galvanic de-coupling of the digital and analogue sections; all these features form the basis for a level of sound quality and measured data very close to the limit of what is physically possible.
Mains socket 100 - 240 V, 60 - 60 Hz
Dimensions (H x W x D)7,5 x 44 x 39 cm
Weight 6 kg
silver aluminium, black
Remote control
via R-System





Follow us